- Have Any Questions?
- export@kingdele.cn
- +86 532 8685 9107
PRODUCTS
- home
- >
- PRODUCTS
Content Us
QINGDAO KINGDELE GLASS CO.,LTD.
Address:ROOM 102, BUILDING 7, MAX INNOVATION TECHNOLOGY INDUSTRIAL PARK, NO.151 WANGJIANG ROAD,HUANGDAO DISTRICT, QINGDAO CITY, SHANDONG PROVINCE, CHINA
WhatsAPP:+86 532 8685 9107
Contact Person:Erin Pan
Tel:+86 532 8685 9107
Fax:+86 532 8685 1939
SGP clear laminated glass
 |  |  |
The shear modulus of the ion film SGP is more than 50 times that of PVB and 5 times of the PVB when the tear strength is used. When the laminated glass produced by the ion film is stressed, there is almost no slip between the two glasses; The piece of glass is like a piece of glass, and its bearing capacity is twice that of PVB laminated glass. Under the same load and the same thickness, the bending of SGP laminated glass is only 1/4 of that of PVB laminated glass.
Compared with laminated glass produced by PVB, the performance of SGP laminated glass produced by SGP film is superior because of the following
properties：
1. It has high bonding ability to glass and strong tear strength, which can prevent the glass from breaking and scattering.
2. It has strong protective ability, can prevent natural disasters and human damage, and has sufficient resistance to strong winds, earthquakes, violence, theft, etc.
3. It can withstand the sudden impact of indoor personnel, prevent the glass from scattering or the whole out, and avoid indoor people and articles flying out and falling.
4. There is enough residual bearing capacity, and the whole piece will not fall off when the glass breaks and then bends.
5. SGP film has sufficient shear modulus to bend the entire section of the laminated glass, improve the bearing capacity and bending rigidity of the glass, and reduce the glass thickness and glass weight.
6. Can withstand the effects of ultraviolet light, water vapor and external climate change, long-term use will not appear yellowing discoloration.
Appearance quality requirement of SGP laminated glass under below table.
items | requirement |
float glass defect | Meet JDG SQ grade glass |
| 0.5-1.0mm bubble qty<=1 within the range of diameter 300mm round |
pvb bubble | 1.0-2.0mm bubble qty<=1 within the range of diameter 600mm round |
|
|
pvb inclusion | Same as above |
chipped edge | Length less than glass thickness;depth less than half thickness;extended distance less than glass thickness |
wrinkle/stripe/crack | Not allowed |
dislocation | One edge<=1.5mm |
Scratch and abrasion | Not affect the usage |
fuzzy shadow | not obvious if observing it from 600mm distance of the glass |
unglued | Not allowed |